QR code check-in

QR code check-in: every attendee gets a code, any phone can scan it.

Every registration in WebMobi gets its own QR code automatically. Attendees get it in their confirmation email; your staff scan it in the WebMobi app, or with a camera or USB badge scanner on the web check-in page.

iOS and Android · offline scanning in the app · a repeat check-in is never counted twice

What it is

QR code check-in in WebMobi is the fastest way through the door: the attendee shows the code from their confirmation email, a member of your team scans it, and the person is checked in to the whole event or to the session the scanner is pointed at. It works from the WebMobi app on iPhone and Android — including with no signal — and from the web check-in page in any browser.

A repeat check-in is recorded but never counted twice, a code for another event is refused, and every scan appears in the event’s History. This page covers what the code is, where to scan it and what each result on screen means.

WebMobi Event App Builder · Build and launch your event app yourself.

WebMobi Event App Builder is a self-service event app builder that helps conference organizers, associations, agencies and event teams create and launch branded event apps — with registration, check-in (including offline check-in and walk-ins), session attendance, agenda, speakers and exhibitors in one platform.

How each attendee gets a code

A QR code is created with the registration itself, so there is nothing to generate or upload. That holds however the person got onto your list: registering on your event page, being added by hand on the registrations page, or arriving in a spreadsheet import.

The registration confirmation email has a section headed “Your Check-in QR Code” asking the attendee to show it at the entrance. A new event sends no email until you turn emails on for it — so switch them on before registration opens if you want attendees to have their code in advance.

Walk-ins are different: they are checked in at the moment they are added. Walk-ins added in the app don’t get a QR code, so any later check-in for them — into a session, or at another desk — is done by name. See walk-in registration.

What the code contains

The code holds a WebMobi reference to the registration — the prefix WEBMOBI:ATTENDEE: followed by a short code. It does not contain the attendee’s name, email address or ticket. When staff scan it, WebMobi looks the registration up: on the server when the device is online, or in the attendee list saved on the phone when it is offline.

Two practical consequences follow. A code on a phone screen, a printout or a screenshot all work the same way — it is the code that counts, not the paper. And because the code carries no personal details, a lost printout gives a stranger nothing to read; but whoever holds the code can be checked in with it, which is why the check-in record shows when a code has already been used.

Scanning in the WebMobi app

  1. Open your event in the app, then Admin Panel → Scan QR Code.
  2. Choose a mode at the top: In / Out, In only or Out only.
  3. Tap Scanning into and pick the session — or Whole event for the main entrance.
  4. Point the camera at the code. The result appears under Recent Scans with the attendee’s name and the session.
You seeWhat it means
The person’s name, checked inOnline — recorded now.
Already insideThey were checked in already. Recorded, not counted twice.
Checked in · queuedOffline — saved on the phone and sent when it reconnects.
Already inside · queuedOffline — this phone already checked them in. Not counted twice.
Not in local list · queued for syncOffline — the code isn’t in this phone’s saved list, for example a late registration. It is saved and matched when the phone reconnects.

Scanning on the web

On a laptop or a phone browser, open the event’s Check-In page on events.webmobi.com, choose the Session and the Scanning mode, and use the QR Scanner with the device’s camera. A USB badge scanner works too: the page keeps an input focused, so each scan checks the person in without a click. The counts at the top refresh every 15 seconds, including scans made on phones. The web scanner needs a connection.

Repeat scans and scanning modes

What a second scan does depends on the Scanning mode, so pick the mode for the door you are staffing:

  • In only — every scan is a check-in. Scanning someone already inside shows “Already inside”; the scan is recorded but not counted again. Best for entrances and session rooms.
  • In / Out — the first scan checks the person in; a scan while they are inside checks them out. Best for one door with one scanner.
  • Out only — every scan is a check-out, for a dedicated exit.

Several phones and computers can scan at the same time: they all write to the same list, and someone scanned at two doors is counted once. In History, every scan is listed, repeats included.

One badge at a time

A camera reads whatever code is in view. At a busy desk, hold one badge in front of the camera at a time — ask people to step up individually rather than holding several phones up together — and check that the name on screen matches the person in front of you before you wave them through. If you print badges, print one code per badge.

When a code is not recognised

Online, if a code isn’t recognised, don’t hold up the line: search the person by name or email in Manual Check-In instead. A code from a different event is refused and records nothing. Offline, a code that isn’t in the phone’s saved list is kept and matched when the phone reconnects — let the person in if their code is for this event. The fix for next time is to open a check-in screen on each phone while connected, close to opening time, so its saved list includes late registrations.

What it does not do

Written down here so you find out now, not on event day.

No badge design or printing

Attendees show the code from their confirmation email, or you print it on badges from your own template.

The code is a reference, not a secure ID

Anyone holding a copy can be checked in with it. The check-in record shows when a code has already been used.

The web scanner needs a connection

Offline scanning is in the WebMobi app.

Walk-ins added in the app have no QR code

Later check-ins for them — into a session, or at another desk — are done by name.

A session scan is not an arrival

Scanning into a session does not check the person into the whole event. See session check-in.

A scan into the wrong session can’t be undone from the scanner

The scan stays in the record; support corrects it if you send the name, the session and the time.

FAQ

How does each attendee get a QR code?

WebMobi creates one automatically for every registration — whether the person registered on your event page, was added by hand or came in through a spreadsheet import. It is in their confirmation email when confirmation emails are on for your event.

What information is in the QR code?

A WebMobi reference to the registration, not the person’s details. Scanning it looks the registration up; the name, email and ticket are not written into the code.

Do we need special scanners?

No. Staff scan with the WebMobi app on iPhone or Android, or on the web check-in page with a computer’s or phone’s camera. A USB badge scanner also works on the web page.

What happens if a code is scanned twice?

In the In only mode, a second scan shows “Already inside”: it is recorded but not counted twice. In the In / Out mode, a scan while the person is inside checks them out.

Can we scan QR codes without an internet connection?

Yes, in the WebMobi app on both iPhone and Android. The phone matches codes against the attendee list it saved and sends each check-in when it reconnects. The web scanner needs a connection.

What if someone shows a code for a different event?

It is refused and nothing is recorded. Codes belong to the registration, and the registration belongs to one event.

Does WebMobi print badges?

No. Attendees show the code from their confirmation email on their phone, or on a printout. If you print your own badges, check that each one scans before the event.

What if a code is not recognised?

Search the person by name in Manual Check-In. Offline, a code that is not in the phone’s saved list — for example a late registration — is saved and matched when the phone reconnects.

Give every attendee a code, and every door a scanner.

Create your event, open registration, and scan the first badge on a practice event before the real one.